SCATTERABLE MINEFIELD RECORD [SCATMINREC]

Use to report emplacement of scatterable mines (SCATMINE). IAW unit SOPs or SCATMINE planning and execution policy, units will prepare and submit SCATMINREC in enough time to allow the request to be disseminated to all affected units. Once executed, it is critical to report each obstacle as a separate SCATMINREC to ensure it gains immediate visibility. (Placing SCATMINREC in the obstacle database, which is how most of the normal obstacles will be reported, slows dissemination.) This is especially important if the obstacle is on a unit boundary or beyond the FLOT. Reference: FM 20-32, FM 90-7, and FM 5-34.

LINE 1 — DATE AND TIME______________________________(DTG)

LINE 2 — UNIT________________________________________(Unit Making Report)

LINE 3 — TGT/OBSTCL NO. _____________________________(Target/Obstacle Number, as per Unit SOPs)

LINE 4 — EMPLACING SYSTEM _________________________(Emplacing System (Volcano (Air or Ground), Artillery (Type), MOPMS, Air Delivered (Air Force), or Gator)

LINE 5 — ANTITANK MINES_____________________________(YES or NO)

LINE 6 — ANTIPERSONNEL MINES_______________________(YES or NO)

LINE 7 — LIFE CYCLE__________________________________(DTG of Life Cycle Planned)

LINE 8 — AIM POINTS__________________________________(Aim Points/Center Point of the Minefield)

a. _____________________________________________(UTM or Six-Digit Grid of One Corner)

b. _____________________________________________(UTM or Six-Digit Grid of One Corner)

c. _____________________________________________(UTM or Six-Digit Grid of One Corner)

d. _____________________________________________(UTM or Six-Digit Grid of One Corner)

LINE 9 — AIM POINTS__________________________________(Aim Points/Center Point of the Minefield)

a. _____________________________________________(UTM or Six-Digit Grid of One Corner)

b. _____________________________________________(UTM or Six-Digit Grid of One Corner)

c. _____________________________________________(UTM or Six-Digit Grid of One Corner)

d. _____________________________________________(UTM or Six-Digit Grid of One Corner)

LINE 10 — AIM POINTS_________________________________(Aim Points/Center Point of the Minefield)

a. _____________________________________________(UTM or Six-Digit Grid of One Corner)

b. _____________________________________________(UTM or Six-Digit Grid of One Corner)

c. _____________________________________________(UTM or Six-Digit Grid of One Corner)

d. _____________________________________________(UTM or Six-Digit Grid of One Corner)

LINE 11 — AIM POINTS_________________________________(Aim Points/Center Point of the Minefield)

a. _____________________________________________(UTM or Six-Digit Grid of One Corner)

b. _____________________________________________(UTM or Six-Digit Grid of One Corner)

c. _____________________________________________(UTM or Six-Digit Grid of One Corner)

d. _____________________________________________(UTM or Six-Digit Grid of One Corner)

LINE 12 — AIM POINTS_________________________________(Aim Points/Center Point of the Minefield)

LINE 13 — AIM POINTS_________________________________(Aim Points/Center Point of the Minefield)

LINE 14 — EMPLACING_________________________________(Unit Emplacing Mines and Report Number)

LINE 15 — SAFETY ZONE_______________________________(Size of Safety Zone)

LINE 16 — MINEFIELD MARKING________________________(Type of Marking, if Applicable)

LINE 17 — APPROVING AUTHORITY_____________________(Approving Authority Commander)

LINE 18 — POC THIS REPORT___________________________(Person Completing This Report)

LINE 19 — ACTIONS___________________________________(Actions Taken by Personnel Involved)

LINE 20 — NARRATIVE_________________________________(Free Text for Additional Information Required for Clarification of Report

LINE 21 — AUTHENTICATION___________________________(Report Authentication)