Report and Message Formats

» NBC 3/ROTA REPORT [NBC3]
Use to pass immediate warning of predicted contamination and hazard areas following NBC attacks or releases other than attack (ROTA) hazards. This NBC3/ROTA voice message accommodates all NBC3/ROTA (NUC, BIO, or CHEM) reporting requirements. Reference: ATP-45 and FM 3-7.

» CLOSE AIR SUPPORT SUMMARY [CASSUM]
Use to provide timely reports of close, air-support missions and other information obtained during post-flight aircrew debriefing. Reference: FM 6-71.

» FIRE SUPPORT ELEMENT-FRIENDLY UNIT LOCATION [FSE.FRD]
Use to report information concerning friendly unit locations and status (for other than organic artillery and NSF units) to facilitate NBC vulnerability analysis. Reference: FM 6-20.

» COMMANDER’S SITUATION REPORT [SITREP]
Use to keep the commander’s higher and lower staff updated and advised on the reporting commander’s critical situation. Reference: FM 100-15, FM 71-3, and FM 71-2.

» AIR DEFENSE COMMAND MESSAGE [AIRDEFCOM]
Use (1) to direct weapon system engagement for defense or air support and (2) to provide receipt of or compliance with commands. Reference: FM 44-100.

» AMMUNITION FIRE UNIT-FIRING SITE DATA [AFU.FSD]
Use to establish and exchange dispersed firing site data for individual cannon, rocket, or missile weapons for the purpose of making tactical fire direction decisions. Reference: FM 6-20-30 and FM 6-20-40.

» DECONTAMINATION REQUEST [DECONREQ]
Use to request decontamination by contaminated units. Initially request on CMD net, then send all traffic through administrative or logistics net. Send initial request with PRIORITY precedence. Reference: FM 3-5.

» FIRE PLANNING-FIRE PLAN EXECUTIVE ORDERS [FP.FPO]
Use (1) to identify the firing element and (2) to specify the number of rounds or effects required for each target in a fire plan. Reference: FM 6-20 and FM 6-20-10.

» FIRE MISSION-BEACON LOCATION [FM.BEALOC]
Use to report the location and identification code of one or more radar beacons. Reference: FM 6-121.

» ASSET/MULTIPLE ASSET STATUS REPORT [ASTSTATREP]
Use to convey the status of the unit’s intelligence collectors. Send every four hours or upon loss to enemy or loss of contact with an asset. Send over the O&I net with PRIORITY precedence. Reference: FM 34-3.

» ACKNOWLEDGE MESSAGE [AKNLDG]
Use (1) to acknowledge receipt of message and indicate planned or accomplished action or (2) to validate intelligence collection requirements. Transmittal of the message implies understanding of the received message. Reference: FM 11-1.

» BULK PETROLEUM ALLOCATION [POLALOT]
Use to allocate bulk petroleum products. Reference: FM 63-20 and FM 63-11.

» ROAD CLEARANCE REQUEST [ROADCLRREQ]
Use (1) to request road clearance and movement authority for the movement of outsized or overweight vehicles or (2) for the movement of convoys over a controlled or restricted road network. Reference: FM 100-15, FM 71-100, and FM 701-58.

» ELECTRONIC WARFARE FREQUENCY DECONFLICTION MESSAGE [EWDECONFLICT]
Use to promulgate a list of protected, guarded, and taboo frequencies to ensure friendly force use of the frequency spectrum without adverse impact from friendly electronic attack. Reference: FM 11-32.

» SENSITIVE ITEMS REPORT [SENITREP]
Use to convey status of military equipment deemed sensitive by chain of command. Send IAW unit SOPs. Reference: FM 19-30.