dcsimg
This website is not affiliated with the U.S. government or military.

Skill Level 1

Page 4 of 9     1 2 3 4 5 6 7 8 9

» 071-054-0002 (SL1) - Restore an M136 Launcher to Carrying Configuration
Standards: Restored the launcher to a safe carrying configuration without damaging the equipment.

» 071-100-0003 (SL1) - Engage Targets with an M4 or M4A1 Carbine
Standards: Detected and determined range to targets. Fired the M4 or M4A1 carbine to engage targets in assigned sector of fire. Applied correct marksmanship fundamentals and target engagement techniques so each target was hit or suppressed.

» 071-100-0004 (SL1) - Maintain an M4 or M4A1 Carbine
Standards: Cleaned, inspected, and lubricated the carbine and magazine so they functioned correctly. Cleaned and inspected the ammunition. Turned in any unserviceable ammunition.

» 071-311-2025 (SL1) - Maintain an M16-Series Rifle
Standards: Cleaned, inspected, and lubricated the rifle and magazine so they functioned correctly. Cleaned and inspected the ammunition. Turned in any unserviceable ammunition.

» 071-311-2027 (SL1) - Load an M16-Series Rifle
Standards: Loaded an M16A1 rifle in the semiautomatic and automatic modes or loaded an M16A2 or M16A4 rifle in both the semiautomatic and burst modes. In either case, ensured that a round was chambered and the selector was returned to the SAFE position.

» 071-311-2028 (SL1) - Unload an M16-Series Rifle
Standards: Cleared the rifle, removed all ammunition and secured the rifle in the SAFE mode.

» 071-311-2125 (SL1) - Maintain an M203 Grenade Launcher
Standards: Cleared the M203 grenade launcher; disassembled the M203; cleaned and lubricated the M203; inspected the M203 before assembly; assembled the M203; and performed a function check on the M203.

» 071-311-2127 (SL1) - Load an M203 Grenade Launcher
Standards: Inserted ammunition into the chamber without damaging the equipment or injuring personnel. Followed all safety procedures in accordance with TM 9-1010-221-10.

» 071-311-2128 (SL1) - Unload an M203 Grenade Launcher
Standards: Pressed the latch and moved the barrel forward to eject ammunition. Caught the round as it dropped.

» 071-311-2129 (SL1) - Correct Malfunctions of an M203 Grenade Launcher
Standards: Corrected malfunctions of an M203 grenade launcher. Followed all safety precautions according to TM 9-1010-221-10.

» 071-311-2130 (SL1) - Engage Targets with an M203 Grenade Launcher
Standards: Destroyed or disabled enemy targets without causing injury or death to friendly personnel.

» 071-312-3025 (SL1) - Maintain an M60 Machine Gun
Standards: 1. Disassembled the M60 machine gun into the following groups: stock; buffer and operating rod; bolt assembly; trigger mechanism; barrel; feed cover, feed tray, and hanger; forearm; and receiver. 2. Cleaned the M60 machine gun, removed powder fouling and other foreign material and identified any unserviceable parts. Did not get CLP in the gas cylinder. 3. Lubricated the M60 machine gun. 4. Assembled the M60 machine gun, performed a function check, ensured the forearm group was locked in place, the hinge pin was interlocked with the latch engaging the sear pin, and the stock group latch engaged.

» 071-312-3027 (SL1) - Load an M60 Machine Gun
Standards: Loaded linked ammunition in the feed tray groove so, when the cover was closed, a round remained in the tray groove and ammunition fed correctly.

» 071-312-3028 (SL1) - Unload an M60 Machine Gun
Standards: Removed all ammunition and links from the machine gun. Cleared the weapon, ensuring the chamber was empty and the safety was on SAFE ("S").

» 071-312-3031 (SL1) - Engage Targets with an M60 Machine Gun
Standards: Fired the M60 machine gun to engage targets in your assigned sector of fire. Applied correct M60 machine gun target engagement techniques so each target was hit.

Page 4 of 9     1 2 3 4 5 6 7 8 9