dcsimg
This website is not affiliated with the U.S. government or military.

Skill Level 1

Page 3 of 9     1 2 3 4 5 6 7 8 9

» 071-008-0007 (SL1) - Engage Targets with an M16-Series Rifle Using an AN/PAS-13 Series Thermal Weapon Sight
Standards: Detected and determined range to targets. Fired the M16-series rifle to engage targets in the assigned sector of fire. Applied correct marksmanship fundamentals and target engagement techniques so each target was hit or suppressed.

» 071-010-0006 (SL1) - Engage Targets with an M249 Machine Gun
Standards: Applied correct M249 machine gun target engagement techniques and hit each target in your assigned sector of fire.

» 071-022-0001 (SL1) - Maintain a Caliber .50 M2 Machine Gun
Standards: Cleaned and lubricated the caliber .50 M2 machine gun and its components. Cleaned and inspected all parts and ammunition and turned in unserviceable parts for maintenance. Assembled the gun so it was operational.

» 071-022-0003 (SL1) - Load a Caliber .50 M2 Machine Gun
Standards: Loaded the linked ammunition in the feed tray groove so, when the cover was closed, a round remained in the tray groove and the ammunition fed correctly.

» 071-022-0004 (SL1) - Unload a Caliber .50 M2 Machine Gun
Standards: Removed all ammunition and links from the machine gun. Cleared the weapon, ensured the chamber was empty and the weapon was in the single-shot mode.

» 071-025-0001 (SL1) - Maintain an M240B Machine Gun
Standards: Cleaned and lubricated the M240B machine gun and components. Inspected all parts, components, and ammunition for serviceability; turned in unserviceable items to maintenance. Correctly assembled the gun and ensured it was operational.

» 071-025-0003 (SL1) - Load an M240B Machine Gun
Standards: Loaded linked ammunition in the feed tray groove so that, when the cover was closed, a round remained in the tray groove and ammunition fed correctly.

» 071-025-0004 (SL1) - Unload an M240B Machine Gun
Standards: Removed all ammunition and links from the weapon. Cleared the weapon, ensured the chamber was empty and the safety was on "F" (FIRE).

» 071-025-0007 (SL1) - Engage Targets with an M240B Machine Gun
Standards: Fired the M240B machine gun to engage targets in the assigned sector of fire. Used correct M240B machine gun target engagement techniques so you hit each target.

» 071-030-0001 (SL1) - Maintain an MK19 Machine Gun
Standards: Cleaned and lubricated the MK 19 and its components. Inspected all parts and turned in those in need of maintenance. Reassembled the gun so it was operational. Cleaned and inspected ammunition for serviceability, and turned in any unserviceable ammunition.

» 071-030-0004 (SL1) - Engage Targets with an MK19 Machine Gun
Standards: Fired the MK19 machine gun to engage targets in assigned sector of fire. Applied correct machine gun target engagement techniques so each target was covered with fire.

» 071-030-0005 (SL1) - Load an MK19 Machine Gun
Standards: Loaded linked ammunition through feed throat into feeder so, when cover was closed, the round was straight and firmly seated against the bolt, and the ammunition fed correctly.

» 071-030-0006 (SL1) - Unload an MK19 Machine Gun
Standards: Unloaded the MK19 machine gun, removed ammunition and empty casings. Cleared the weapon, made sure the chamber was empty and the safety switch was in the safe (S) position.

» 071-030-0007 (SL1) - Perform a Function Check on an MK19 Machine Gun
Standards: Conducted an operational check of the MK19 machine gun to make sure it was correctly assembled and functioned properly.

» 071-054-0001 (SL1) - Prepare an M136 Launcher for Firing
Standards: Performed prefire checks on the M136 AT4 and prepared the round for firing.

Page 3 of 9     1 2 3 4 5 6 7 8 9