Skill Level 1
Standards: Respond to DU and implement protective measures as required.
» 031-503-1018 (SL1) - React to Nuclear Hazard/Attack
Standards: React to a nuclear hazard or attack without becoming a casualty of a nuclear attack with or without warning. Identify radiological contamination markers with 100 percent accuracy, and notify the supervisor. Start the steps to decontaminate yourself within 1 minute of finding radiological contamination. Decontaminate your individual equipment after you completely decontaminate yourself.
» 031-503-1019 (SL1) - React to Chemical or Biological Hazard/Attack
Standards: React to a chemical or biological hazard or attack without becoming a casualty. Identify chemical contamination markers with 100 percent accuracy, and notify supervisor. Start steps to decontaminate yourself within 1 minute of finding chemical contamination. Decontaminate your individual equipment after you completely decontaminate yourself.
» 031-503-1035 (SL1) - Protect Yourself from Chemical/Biological Contamination Using Your Assigned Protective Mask
Standards: Protect yourself from chemical or biological contamination using your assigned protective mask. Don, clear, and check your mask within 9 seconds. Drink water through your protective mask from your canteen without becoming a casualty.
» 031-503-1036 (SL1) - Maintain Your Assigned Protective Mask
Standards: Maintain your assigned protective mask. Perform preventive-maintenance checks and services (PMCS) on the mask according to the applicable TM. Clean and dry the mask. Do not damage the mask. Record uncorrected deficiencies and shortcomings on DA Form 2404, and report them to the supervisor.
» 031-503-1037 (SL1) - Detect Chemical Agents Using M8 or M9 Detector Paper
Standards: Detect chemical agents using M8 or M9 detector paper. Attach the M9 detector paper in places likely to come into contact with liquid chemical agents. Detect all liquid chemical agents in the area without becoming a casualty. Identify all liquid chemical agents within the capability of the M8 detector paper.
» 052-191-1361 (SL1) - Camouflage Yourself and Your Individual Equipment
Standards: Camouflage yourself and your individual equipment to prevent detection by visual, near-infrared, infrared, ultraviolet, radar, acoustic, and radio sensors.
» 052-191-1362 (SL1) - Camouflage Equipment
Standards: Camouflage equipment so all shiny parts are concealed, all remaining parts of the equipment are covered in irregular patterns, and outlines blend with predominant terrain background in the area. Camouflage equipment to prevent detection by visual, near-infrared, infrared, ultraviolet, radar, acoustic, and radio sensors.
» 052-192-1042 (SL1) - Perform Self-Extraction from a Mined Area
Standards: Self-extract from a mined area, by foot or from a vehicle, under the following conditions without causing personal injury or mine detonation. When footprints are clearly visible, when footprints are not clearly visible (stepping-stone and lane technique), and from a vehicle. Locate, mark, and bypass each trip wire and mine within the area probed. Remove enough soil to confirm the presence of a mine. Report the mined area information to higher headquarters.
» 052-192-1242 (SL1) - Locate Mine and Booby Trap Indicators by Visual Means
Standards: Visually locate all mine/booby trap indicators, and improvised markings in the prescribed area without causing injury to personnel and damage to equipment. Report indicators to immediate supervisor.
» 071-000-0005 (SL1) - Prepare a Range Card for a Machine Gun
Standards: Prepared a range card for your position in duplicate. Sketched in the terrain in your assigned sector of fire. Located and sketched in magnetic north, using the appropriate symbol. Sketched in sector limits, the gun symbol, a FPL or PDF, and dead space. In the DATA SECTION wrote in the weapon, the unit, and other data. Sketched in terrain features that offer likely targets and numbered them in priority. Recorded the range and direction to and the elevation and description of each target.
» 071-004-0001 (SL1) - Maintain an M9 Pistol
Standards: Cleaned and lubricated M9 pistol and magazine; inspected parts, turned in unserviceable parts for maintenance, assembled pistol, ensured pistol was operational, cleaned and inspected ammunition for serviceability, and turned in unserviceable ammunition.
» 071-004-0003 (SL1) - Load an M9 Pistol
Standards: Correctly loaded the magazine and ammunition into the pistol; ensured safety lever was in the safe position.
» 071-004-0004 (SL1) - Unload an M9 Pistol
Standards: Correctly removed magazine and ammunition from the pistol; removed all the rounds from the magazine; and ensured the pistol safety lever was in the SAFE position.
» 071-004-0006 (SL1) - Engage Targets with an M9 Pistol
Standards: Applied the correct M9 target engagement techniques, and engaged hostile targets.